品牌：RETZ瑞茨我们一直致力于流体控制和测控领域的持续创新，始于2005……

气动刀型闸阀(浆液阀)分为上下两部分，上半部分为气动执行器，下半部分为刀阀,其结构可以做成硬密封、软密封，与气动执行器辅助配合,利用气动执行器控制阀门，从而实现阀门的开和关的一种阀门 The pneumatic knife type gate valve (slurry valve) is divided into parts: the upper part is a pneumatic actuator, and the lower part is aknife valve. Its structure can be made into a hard seal and a soft seal, whichcan beed in conjunction with the pneumatic actuator to control the valve andachieve the opening and closing of the valve

进口气动刀型闸阀产品详情 Productdetails

进口气动刀型闸阀(浆液阀)的闸板关闭到位时通径无死角，根据流体分析设计冲力，自动冲解通径死角处杂物使介质通过更顺畅；内部设有弧形刮片使闸板在启闭工作全面积刮净表面使寿命更长，防止介质残留在阀腔，造成阀门开关不畅 RETZ When the gate of the pneumatic knife type gate valve (slurryvalve) is closed in place, there is no dead angle in the diameter. ording tothe fluid analysis, the impulse is designed to automatically fh the debrisat the dead angle of the diameter to make the medium pass more smoothly; Arcscraper is set inside to make the gate clean in the full area of the openingand closing work, so as to prolong the service life and prevent the medium fromremaining in the valve chamber, cing the valve to open and close smoothly

闸板锋利切割力强，表面平整 The ramhas strong cutting force and flat surface

进口气动刀型闸阀执行器参数 Actuatorparameters

 进口气动刀型闸阀(浆液阀)规格说明 Description

公称压力 Nominal Pressure：PN10/150LB

规格尺寸 Size：2～32”

适用温度 Temperature: 软密封≤ 80℃、120℃,硬密封≤ 350℃、≤ 700℃